Here is a
Hale-12, in assembly process...
Next, the Subfloor is on, and we're ready for assembly!
This Hale has a room extension, you can see on the left.
Wall Panel Assembly:
First two panels going up:
One hour later:
Placed around Walls, ready to slide up into place. First panel up:
Next panel being handed up...
Last roof panel is up by mid-day and ready
to add roofing underlayment,
for a weather-tight home shell in one day.
(Extension area roof to be framed onsite)
Here is another shot taken a few days
with windows in and roofing being installed:
Here is an
Expanded Hale-12, in its assembly process...
Panel #1... #2...
Shell assembly completed:
Expansion rooms framed and Cedar roof sheathing applied:
Sprayed with Cetol stain/wood finish:
Next: add roofing, vinyl windows...
Here's a 2-Story Expanded
in its assembly process...
First floor walls assembled,
and some Cetol applied for weather protection:
2nd floor wall panels going up:
Hale-12 Roof Panels, lifted with forklift...
and going up...
Covered 2-Story Lanai added:
Here are a few photos from the
Home Assembly and Construction Page of Jim Haeffner:
1120 Series -- Includes a Hale-8 connected to an Expanded Hale-12
First the Hale-8 goes up:
Then the Hale-12:
Then the Expanded area:
To see the rest of that page, including information the overall building project, you can click here:
And our thanks go out to Jim at SouthPointHawaii.com for making the following Slide Show of our shell assembly process,
as linked on our "Assembly Tour" page: http://www.southpointhawaii.com/images/new_site_images/MFH_swf/MF_build.htm